Minimum Requirement for CCIE Certification

People often ask me what is the minimum requirement/prerequisite to appear for CCIE Certification.
So my friend, please be assured that there is no formal requirement/prequisite for appearing CCIE Exam Certification, no Certification is required prior to give exam of CCIE.
But there are two steps of CCIE Certification, CCIE Written and CCIE Lab.
You must first pass a Written qualification exam and then the corresponding hands-on lab exam.

You are expected to have an in-depth understanding of the topics in the exam blueprints and strongly encouraged to have three to five years of job experience before attempting certification. But again these are not the hard and fast prerequisites.  

Free Software to Open any type of File

Are you tired of Downloading and Installing software for different types of files? Especially when you have installed fresh window in your PC, the time wasted to install other required everyday software is much more than the time of actual windows installation. 

Every day software means, the software which we need most of the time while operating PC, such as Media Players, Adobe Acrobat Reader, FLV, Open Zip Files, Open Image Files and many more...

Free Cisco CCNP Webinar to highlight Certification and Career path after CCNP

Cisco is presenting a free CCNP Webinar for individuals who are thinking of becoming CCNP certified, or have just started preparing to take their CCNP exams.

As per Cisco, this 90 minutes Webinar highlight the technologies and topics an individual will need to know to achieve their Cisco CCNP® certification.  

In addition, the Essentials of CCNP Webinar reviews the latest training methods and content available for CCNP certification, including the new Cisco Learning Labs for CCNP and the certifications and career paths available after becoming CCNP certified. 

Participate Cisco Exam CoLaboratory, and get Time Extension on your Certification

Is your last cisco certificaiton is near to expire ??? and not prepared for your next exam to make active your older certification??? Do not worry, you can extend your certification for one year by participating in Cisco Exam CoLaboratory Program. 

The Cisco Exam CoLaboratory project is a program through which you can earn a time extension on your Cisco certification in exchange for your help authoring and reviewing Cisco exam items.

What you have to do is to help author and review exam items for the ROUTE, ICOMM, CVOICE, TVOICE and CCIE VOICE exams, at your home.

Cisco will provide accepted candidates with comprehensive online training on how to author exam items. When you have satisfied your item-writing goal and the project concludes, Cisco will extend your certification for one full year!

Even a Cow is Connected to Internet, Internet of Things

Currently, IoT is made up of a loose collection of disparate, purpose-built networks. Today’s cars, for example, have multiple networks to control engine function, safety features, communications systems, and so on. Commercial and residential buildings also have various control systems for heating, venting, and air conditioning (HVAC); telephone service; security; and lighting. As IoT evolves, these networks, and many others, will be connected with added security, analytics, and management capabilities. This will allow IoT to become even more powerful in what it can help people achieve.

Join Cisco on Linkedin To Win a Cisco Certification Written Exam

Cisco Learning Network is offering to win a Cisco Certification Exam, Value up to US $ 350. What you have to do is to join Cisco Learning Network and its Group on Linked in Social networking site. Then start a discussion about how Cisco Certifications helps you in your career.

Click here to see my Discussion on CLN group at Linked in. 

Detailed procedure of how to join and win Certification Written Exam is given Below

The competition will run from May 9 – May 31, 2011 11:59pm PST. 

How to play?

Step 1: Join Learning@Cisco Linkedin Group. (http://www.linkedin.com/groupRegistration?gid=3443017)

Step 2: Register on Cisco Learning Network (http://www.ciscolearningnetwork.com)

Difference between Asynchronous and Synchronous Transmission

Asynchronous transmission uses start and stop bits to signify the beginning bit ASCII character would actually be transmitted using 10 bits e.g.: A "0100 0001" would become "1 0100 0001 0". The extra one (or zero depending on parity bit) at the start and end of the transmission tells the receiver first that a character is coming and secondly that the character has ended. This method of transmission is used when data is sent intermittently as opposed to in a solid stream. In the previous example the start and stop bits are in bold. The start and stop bits must be of opposite polarity. This allows the receiver to recognize when the second packet of information is being sent.

What is Sticky Keys in Windows

Press shift key five times in a row, and Windows will ask you If you want to enable Sticky Keys?
Perhaps you sometimes have encountered this. So what this actually is?
Sticky key makes certain keyboard functions easier to access, and let's see how it does!
Windows provides some shortcut keys to launch a program or do copy, paste or undo functions, e.g to launch

Time to Secure your USB Drive to protect your Data

USB drives are the most popular way to move data from one PC to another. They are small in size but can carry gigabytes of data. They are easy to use, convenient, affordable, but at the same time they pose a security risk and can be easily lost, stolen or misplaced. A secure USB drive i.e., a password protected USB drive is a must these days as the data that it contains may cost you millions of dollars if stolen or lost.

USB Secure can password protect USB and other flash drives. Protection is PC independent, doesn't require installation and doesn't require administrator rights at the other end.
USB Secure works with all types of portable media like;
USB Flash drives,
Thumb drives, 
Memory sticks, 
External drives and 
Memory Cards.

How CSMA/CD Process Works, Career Sense Multiple Access/Collision Detection

The original Ethernet specifications expected collisions to occur on the LAN. The media was shared, creating a literal electrical bus. Any electrical signal induced onto the wire could collide with a signal induced by another device. When two or more Ethernet frames overlap on the transmission medium at the same instant in time, a collision occurs; the collision results in bit errors and lost frames. The original Ethernet specifications defined the Carrier Sense Multiple Access with Collision Detection (CSMA/CD) algorithm to deal with the inevitable collisions. CSMA/CD minimizes the number of collisions, but when they occur, CSMA/CD defines how the sending stations can recognize the collisions and retransmit the frame.
Let's break out this CSMA/CD in CS, MA and CD and then try to understand how Career Sense, Multi-Access, and Collision Detection works in the Ethernet Technology.

How Ethernet Device Knows that a Collision is Occurred?

The answer to the Question is very simple, that is, when two or three of the signal are collided on the Ethernet segment/media then the amplitude of the signal is increased above the normal level of the signal. The detection of a collision is made possible because all devices can detect an increase in the amplitude of the signal above the normal level.

How Autonegotiation (AN) Works with Fast Link Pulse (FLP)

The purpose of AN is to automatically configure two devices that share a link segment to take maximum advantages of their capabilities. This allows devices at both ends of the link segment to advertise their capabilities, acknowledge receipt and understanding of the common mode of operation that both devices share, and reject the use of modes that are not supported by both devices.

AN is performed using a modified link-integrity pulse (called FLP, or Fast Link Pulse) such that no packet or upper protocol overhead is added. Each device capable of AN, issues FLP bursts at power up, on command from the MAC, or due to user interaction.

How to set IDLE PC value in gns3

You may also like to know why the idle pc value is set in gns3

Here is how idle pc value is set in gns3

• First of all drag and drop your desired router in the topology diagram section of the gns3

• Start the router by right clicking it and selecting Start

• Again right click and select idle pc value as shown below

Access your URL Bookmarks from any where in the World

Sharing a little program, which most of you certainly like. Because i was in search of this program for a long time. That is how to access your Bookmarks (Web Address), from any where in the world.
In my daily routine I usually access internet from three PCs, and i often shift URL Bookmarks through USB, which is always not updated by me and it is very hectic to update all PC with URL Bookmarks on daily basis. The solution to my this problem is softwre XMARKS.